Why do green/red/blue/white dots or defective dots remain on the screen of my Eizo Monitor?
The presence of green, red, blue, or white dots or defective dots on your Eizo monitor screen is due to LCD panel characteristics and is not a failure.
What to do if the message appears on my Eizo COLOR EDGE CG241W?
If a message appears on your Eizo monitor, check that the PC is turned on, ensure the signal cable is properly connected, and try switching the input signal.
How to fix no picture on my Eizo Monitor and the power indicator does not light?
If your Eizo monitor shows no picture and the power indicator is off, check whether the power cord is connected correctly. If the problem persists, turn off the monitor, and then turn it on again a few minutes later.
Why is my Eizo COLOR EDGE CG241W Monitor power indicator lighting orange?
If the power indicator on your Eizo monitor is lighting orange, try switching the input signal. You can also try operating the mouse or keyboard, or turning on the PC.
What to do if my Eizo COLOR EDGE CG241W displays an incorrect display position?
If the display position is incorrect on your Eizo monitor, adjust the image position using the adjustment so that it is displayed properly within the display area.
Why can't I set up the USB function on my Eizo Monitor?
If you cannot set up the USB function on your Eizo monitor, check that the USB cable is correctly connected.
Why does not function on my Eizo COLOR EDGE CG241W?
functions on your Eizo monitor do not work when a digital signal is input. Check for the Adjustment Lock function.
What to do if my PC is hung up or the peripherals connected to the downstream ports do not operate on my Eizo COLOR EDGE CG241W?
If your PC is hung up or the peripherals connected to the downstream ports do not operate when connected to your Eizo monitor, check that the USB cable is correctly connected.
Why is the upper part of the screen distorted on my Eizo COLOR EDGE CG241W?
The upper part of the screen is distorted on your Eizo monitor when both composite sync (X-OR) signal and separate vertical sync signal are input simultaneously. Select either composite signal or separate signal.
How to fix blurred characters on my Eizo COLOR EDGE CG241W Monitor?
If the characters on your Eizo monitor are blurred, adjust using .
Identifies the locations where caution statements are displayed on the unit.
Explains how to connect two computers to the monitor.
Details how to utilize the monitor's built-in USB hub functionality.
Covers adjusting screen position, size, and image quality.
Explains how to adjust color settings using FineContrast modes.
Addresses no picture, signal check messages, and signal errors.
Covers screen size, flickering, blurring, and distortion issues.
Addresses screens that are too bright/dark and afterimages.
To Next Page
General