Color Adjustment of the Mode Settings
<Brightness>, <Temperature> and <Gamma> settings can be adjusted on the
FineContrast menu. Select the desired function icon with the Up/Down Control buttons
and adjust with the Left/Right Control buttons. (Setting(s) of <Temperature> and/or
<Gamma> is defined as standard default in some modes.
Detailed Adjustments
The detailed color settings of each mode can be adjusted by using the <Color> menu
of the ScreenManager.
* "CAL" mode can be adjusted only by Calibration Software "ColorNavigator".
Adjustment Lock
Use the "Adjustment Lock" function to prevent any accidental changes.
Locked function
● Settings in the ScreenManager
● Auto Adjustment Button
Unlocked function
● Selecting of the FineContrast mode by the Right or Left
buttons, / Adjustments
● <Brightness> setting by the Up or Down buttons.
● Input Signal Selection Button
● Power Button
[To lock]
Switch off the monitor's power by the power button on the front control panel. Press on
the Auto Adjustment button while switching on the monitor's power.
To Next Page