7-2. Setting Procedure
This section describes the procedure to use the monitor with the settings suitable for displaying SDR or
HDR image.
Note
• For more information about SDR/HDR setting procedure with ColorNavigator 7, see “7-3. Settings with
ColorNavigator 7” (page 56).
1.
Select a color mode.
Select a color mode suitable for the application.
Color Mode Application
BT.2020 (SDR) This color mode is suitable for reproducing ITU-R BT.2020 standard-compliant
color gamut and gamma.
BT.70 9 (SDR) This color mode is suitable for reproducing ITU-R BT.709 standard-compliant
color gamut and gamma.
DCI-P3 (SDR) This color mode is suitable for reproducing DCI standard-compliant color gamut
and gamma.
PQ_BT. 2100 (HDR) This color mode is suitable for reproducing ITU-R BT.2100 standard-compliant
color gamut in PQ format gamma (EOTF).
PQ_DCI-P3 (HDR) This color mode is suitable for reproducing DCI standard-compliant color gamut
in PQ format gamma (EOTF).
HLG _BT. 2100 (HDR) This color mode is suitable for reproducing ITU-R BT.2100 standard-compliant
color gamut in HLG format gamma (EOTF).
52
Chapter 7 SDR/HDR Settings
To Next Page
Loading...
Need help?
General