How to fix interference patterns or pressure marks on Eizo ColorEdge CS230 Monitor screen?
If you observe interference patterns or pressure marks on your Eizo monitor screen, leave the monitor displaying a white or black screen. This symptom may disappear over time.
What to do if my Eizo Monitor has no picture?
If your Eizo monitor shows no picture and the power indicator is off: * Check if the power cord is properly connected. * Turn on the main power switch. * Press the power button on the monitor. * Turn off the main power, wait a few minutes, and then turn it back on.
Why is the adjustment menu not appearing on my Eizo ColorEdge CS230 Monitor?
If the adjustment menu is not appearing on your Eizo monitor, check whether the operation lock function is active.
Why is no mode menu displayed on my Eizo Monitor?
If no mode menu is displayed on your Eizo monitor, check whether the operation lock function is active.
Why is my Eizo ColorEdge CS230 Monitor USB not working?
If your Eizo monitor is not detecting the USB connection or USB devices connected to it are not working: * Ensure the USB cable is correctly connected. * Check the 'USB Selection' settings under the 'Tools' menu in the monitor's settings. * Try using a different USB port on your computer. * Reboot your PC. * Confirm that your PC and operating system are USB compliant. * Check the PC's BIOS settings for USB configuration, especially if you're using Windows.
What does Error Code 0061 mean on Eizo Monitor and how to fix it?
If your Eizo monitor displays Error Code 0061: * The built-in correction sensor may not have come out. * Check for any foreign objects near the built-in correction sensor. * Execute SelfCorrection again.
What does Error Code 0034 mean on Eizo Monitor and how to fix it?
Error Code 0034 on your Eizo monitor may indicate that the built-in correction sensor did not come out during calibration, or that light entered the sensor during measurement. To resolve this: * Turn off the main power. * Wait a few minutes before turning the power back on. * Execute SelfCorrection again.
What does Error Code 0050 mean on Eizo ColorEdge CS230 and how to fix it?
If your Eizo monitor displays Error Code 0050, execute SelfCorrection again.
What to do if Eizo ColorEdge CS230 Monitor built-in correction sensor does not come out?
If the built-in correction sensor on your Eizo monitor does not come out or stays out, turn off the main power, wait a few minutes, and then turn it back on.
How to fix abnormal displays on Eizo ColorEdge CS230?
If your Eizo monitor displays abnormal images, use the 'Color Space' option (for HDMI input) under the Adjustment menu to adjust the color settings.
Describes the monitor's key specifications and capabilities.
Details the physical buttons, connectors, and their operations.
Guides on basic menu navigation, adjustment, and exiting.
Lists supported screen resolutions for analog and digital inputs.
Explains how to select and perform advanced adjustments for color modes.
Sets the color space for input signals to ensure correct color display.
Allows selection of specific display modes only.
Changes the orientation of the adjustment menu display.
Adjusts screen uniformity for brightness and color.
Restores settings to factory defaults for color or all adjustments.
Describes the process of using the built-in correction sensor.
Configures the monitor's power saving modes based on PC status.
Controls the Auto EcoView function for ambient light brightness adjustment.
Addresses issues related to the monitor not displaying an image.
Covers common display and image quality issues like brightness, blurriness, and noise.
Troubleshoots problems with the built-in correction sensor and SelfCorrection.
Instructions for mounting the monitor with an optional arm or stand.
Details how to use the monitor's USB hub functionality for peripheral devices.
Provides detailed technical specifications for CS230 and CX240 models.
Lists registered trademarks, logos, and copyrights.
Regulatory compliance statement for FCC rules.
Instructions for proper disposal and recycling of the product.
General| 3D | No |
|---|---|
| Pixel pitch | 0.2652 x 0.2652 mm |
| Aspect ratio | 16:9 |
| Product type | PC monitor |
| Response time | 10.5 ms |
| Display diagonal | 23 \ |
| Display technology | LED |
| Vertical scan range | 47.5 - 61 Hz |
| Horizontal scan range | 26 - 68 kHz |
| Viewable size diagonal | 584 mm |
| Viewable size, vertical | 286.4 mm |
| Contrast ratio (dynamic) | - |
| Contrast ratio (typical) | 1000:1 |
| Display number of colors | 1.073 billion colors |
| Viewable size, horizontal | 509.2 mm |
| Display brightness (typical) | 300 cd/m² |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| HDCP | Yes |
| USB hub version | 2.0 |
| VGA (D-Sub) ports quantity | 0 |
| USB Type-A downstream ports quantity | 4 |
| Pivot angle | 0 - 90 ° |
| Tilt angle range | 0 - 30 ° |
| Number of OSD languages | 9 |
| Panel mounting interface | 100 x 100 mm |
| On Screen Display (OSD) languages | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, SWE |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 54 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 21 W |
| Certification | CUDO, TCO 6.0, TUV/S, TUV/Ergonomics, TUV/GS, cTUVus, CE, c-Tick, CB, VCCI-B, FCC-B, ICES-003-B, RoHS, WEEE, GOST-R |
| Product color | Black |
| Market positioning | Graphics design |
| Cables included | AC, DVI, USB |
| Operating temperature (T-T) | 0 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth (with stand) | 245.5 mm |
|---|---|
| Height (with stand) | 526.5 mm |
| Weight (with stand) | 7500 g |
| Depth (without stand) | 75 mm |
| Width (without stand) | 544 mm |
| Height (without stand) | 353 mm |
| Weight (without stand) | 4800 g |
To Next Page
