Eizo ColorEdge CS230

43
Chapter6Troubleshooting
6-3. Other problems
Problem Possible cause and remedy
1. The adjustment menu does not appear. • Checkwhethertheoperationlockfunctionisactive(see
“3-6.LockingOperationButton”(page33)).
2. No mode menu is displayed. • Checkwhethertheoperationlockfunctionisactive(see
“3-6.LockingOperationButton”(page33)).
3. The monitor connected with the USB cable
is not detected. / USB devices connected
to the monitor does not work.
• CheckwhethertheUSBcableisconnectedcorrectly(see
“7-3.MakingUseofUSB(UniversalSerialBus)”(page48)).
• Checkthe“Tools”–“USBSelection”settingsunder
theSettingmenu(see“3-8.SwitchingUSBPort
Automatically”(page34)).
• ChangetheUSBporttoanotherone.IfthePCor
peripheraldevicesworkscorrectlybychangingtheUSB
port,contactyourlocalEIZOrepresentative.(Refertothe
manualofthePCfordetails.)
• RebootthePC.
• IftheperipheraldevicesworkcorrectlywhenthePCand
peripheraldevicesareconnecteddirectly,pleasecontact
yourlocalEIZOrepresentative.
• CheckwhetherthePCandOSareUSBcompliant.(For
USBcomplianceoftherespectivedevices,consulttheir
manufacturers.)
• CheckthePC’sBIOSsettingforUSBwhenusing
Windows.(RefertothemanualofthePCfordetails.)
4. Audio is not output. • ThismonitordoesnotsupporttheHDMI/DisplayPort
audiosignals.