Eizo ColorEdge CS230

29
Chapter2AdjustingScreens
●
HDMI (HD signal) input
Settings Function
Enlarged Displaysanimageinfullscreen.Insomecases,ablankhorizontalorverticalborder
appearstoequalizetheverticalrateandthehorizontalrate.
DotbyDot Displaysimageswiththespeciedresolution.
Example:720p Enlarged DotbyDot
CS230
CX240
Procedure
1. Choose “Screen” from the Adjustment menu, and press
.
2. Choose “Screen Size” from “Screen”, and press
.
3. Select “Enlarged”, or “Dot by Dot” with
or .
4. Press
to exit.
Attention
• For CX240, an image cannot be displayed using the entire screen when the HDMI signal is input.