Why doesn't the Setting menu appear on my Eizo RadiForce RX660 Monitor?
If the Setting menu does not appear on your Eizo Monitor, check whether the operation switch lock function has been activated.
Why is my Eizo Monitor not detecting the USB connection or the connected USB device isn't working?
If your Eizo Monitor connected using the USB cable is not detected or the USB device (peripheral) connected to the monitor does not work, check the following: * Check whether the USB cable is connected correctly. * Try changing to a different USB port on the PC. * Try changing to a different USB port on the monitor. * Reboot the PC. * Try switching PCs used to operate the peripheral. * If the peripheral works normally when directly connected to the PC, contact your dealer or local EIZO representative. * Check whether the PC and OS are USB compliant.
What to do if my Eizo RadiForce RX660 Monitor has no picture and the power switch indicator is orange?
If your Eizo Monitor displays no picture and the power switch indicator is orange, try the following: * Switch the input signal. * Move the mouse or press any key on the keyboard. * Check if the PC is turned on. * If the Presence Sensor is set to "On", try moving closer to the monitor, as it may be in power saving mode. * Turn off the main power and then turn it on again.
What to do if a message appears on my Eizo RadiForce RX660?
If your Eizo Monitor displays a message, try the following: * Check if the PC is turned on. * Check if the signal cable is connected properly. * Try switching the input signal. * If the signal cable is connected to DisplayPort, try switching the DisplayPort version. * Turn off the main power and then turn it on again.
What to do if my Eizo Monitor has no picture but the power switch indicator is green?
If your Eizo Monitor displays no picture and the power switch indicator lights up green, try these steps: * Increase the “Brightness”, “Contrast”, or “Gain” in the Setting menu. * Turn off the main power, and then turn it on again.
Why does my Eizo Monitor turn off during operation and the screen goes blank?
To resolve a situation where your Eizo Monitor's power is turned off during operation and the screen does not appear, consider the following: The monitor turns off automatically when the internal temperature is excessively high. If you switch the power on in a high-temperature state, the monitor turns off again in one minute. * Change the installation location or environment. Wait for a few minutes, and then turn the power on again. * Ensure you are not blocking the monitor’s ventilation slot, and avoid using the monitor in a poorly ventilated location.
How to display the clock time correctly in the SelfCalibration / Grayscale Check history on my Eizo RadiForce RX660 Monitor?
Perform monitor detection using RadiCS / RadiCS LE on your Eizo Monitor.
Why doesn't the Mode menu appear on my Eizo RadiForce RX660?
If the Mode menu does not appear on your Eizo Monitor, check whether the operation switch lock function has been activated.
Why do afterimages appear on my Eizo RadiForce RX660?
If afterimages appear on your Eizo Monitor, avoid displaying the same image for a long time. Use the screen saver or power saving function to avoid displaying the same image for extended periods of time. If this occurs, changing the image or leaving the power off for a few hours may solve the problem.
What to do if my Eizo RadiForce RX660 Monitor has no picture and the power switch indicator blinks orange and green?
If your Eizo Monitor displays no picture and the power switch indicator blinks orange and green, connect via the signal cable specified by EIZO and turn off the main power, and then turn it on again. If the signal cable is connected to DisplayPort 1, try switching the DisplayPort version.
Defines the product's intended use and any limitations or warranty considerations.
Details how to connect signal cables for single screen and dual screen displays.
Guides on turning on the monitor, PC, and adjusting screen height and angle.
Provides solutions for situations where the monitor does not display an image or has indicator problems.
Comprehensive list of technical specifications for the monitor, including panel, video, and physical attributes.
Provides crucial information on Electromagnetic Compatibility and intended use environments.
General| Screen Size | 21.3 inches |
|---|---|
| Resolution | 2048 x 1536 |
| Panel Type | IPS |
| Aspect Ratio | 4:3 |
| Viewing Angles (H / V) | 178° / 178° |
| Color Depth | 10-bit |
| Viewing Angle | 178°/178° |
| Contrast Ratio | 1500:1 |
| Connectivity | DVI-D, DisplayPort |
| Display Colors | 1.07 billion colors |
| Input Terminals | DVI-D, DisplayPort |
| Color Gamut | Adobe RGB |
| Calibration | Factory calibrated |
To Next Page
