EasyManua.ls Logo

EJEAS X10 - Product Operation; Button Description

EJEAS X10
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reset: the machine will automatically switch off when charging, and can be used
while charging after switching on.
Battery level check: After connecting your mobile phone via Bluetooth, you can see
the battery level icon on your mobile phone.
Beep
Power on/off
Low battery indicator
When the battery is low, the red light
blinks rapidly and the voice prompts
‘low battery’. When the battery is super
low, the device will shut down automatically.
Red light is always on when charging.
Red light goes out when fully charged.
Charging indication
Power on Power off
Long press (about 1 second) the <Phone/
Power button>until the blue light flashes
and there is a power on prompt sound.
After turning on, it is in standby mode and
the blue light flashes slowly.
Press and hold <Phone/Power Button> +
<Intercom Button> until you hear the
tone ‘Switch off ’.
Blue light flashing slowly
Indicator light off
Beep
Please charge it well before use.
Basic Operation
Product Operation
Button Description
Click Double
Click
Three
Click
Long press
for 1 second
Long press
for 3 second
Long press
for 5 second
3s
5s

Related product manuals