Need help?Do you have a question about the EK-Quantum Vector2 Red Devil RX 7900 XTX D-RGB and is the answer not in the manual?
General| Cooling Type | Liquid Cooling |
|---|---|
| Compatibility | AMD Radeon RX 7900 XTX |
| Material | Aluminum |
| RGB Lighting | D-RGB (Addressable RGB) |
| RGB Connector | 3-Pin 5V Addressable D-RGB header |
| Connector Type | G1/4" |
| Weight | Approx. 1.2 kg |
Carefully remove the stock cooler and unplug all LED and fan connectors from the graphics card.
Cut thermal pads to size and place them on the PCB components like VRMs, coils, MOSFETs, and drivers.
Apply a thin, even layer of thermal grease on the GPU heat spreader (IHS) for optimal performance.
Carefully position the water block onto the graphics card, aligning mounting holes and ensuring thermal pads are correctly placed.
Apply thermal pads to the backplate in the specified locations before attaching it to the water block assembly.
Position the backplate onto the GPU PCB and tighten screws evenly, ensuring alignment.
Carefully lift and insert the graphics card with the water block into the motherboard's PCIe slot.
To Next Page