Page 12
PROBLEM POSSIBLE CAUSE SOLUTION
No sound - when audio
is connected to a home
stereo.
• Source Selection on your stereo
is not set properly
• Improper Connection to stereo
system or PA
• Patch cords are not connected
securely.
• Select AUX IN as the source for
your home stereo
• Follow direction on page 7 for
connecting to a home stereo
system
• Ensure white and red patch
cords are securely inserted into
both the karaoke system and the
home stereo system
No song lyrics appear on
the TV screen
• Video cable is not connected
properly to the TV
• Source selector on TV is not set
to VIDEO
• TV does not have video line
input
• A CDG is loaded but the CD+G
icon is not lit
• Connect the video cable to the
karaoke system’s VIDEO OUT
and to the TV VIDEO IN. Refer to
page 8 under Connecting to your
TV or VRC / DVD player
• Using your TV remote to select
VIDEO input or select the proper
VIDEO input on the TV itself.
(Refer to page 6 under Connect-
ing to your TV or VRC / DVD
player.
• Connect from VIDEO OUT of
the system to the VIDEO IN on
your VCR or connect to an RF
Modulator and then to the TV
cable input. Refer to “Connec-
tions” on page 7.
• Check the disc to be sure it is
a CDG.
No sound from mic • Mic volume control is set to
minimum
• Mic is off
• Adjust mic volume to max, and
then re-adjust to a comfortable
level
• Turn on mic with the ON/OFF
switch located on the microphone
TROUBLESHOOTING
No sound when playing audio via
Bluetooth.
• Your Bluetooth device does not
paired properly.
• Pair your Bluetooth device
according to the "Bluetooth setup"
section.
• The volume control of your
Bluetooth device is set at too
low.
• Increase the volume of your
Bluetooth device.
• The volume control of the unit
is set at too low.
• Increase the volume of the unit
by VOLUME control.
To Next Page
Loading...
