Page 10
BLUETOOTH OPERATIONS
BLUETOOTH SETUP
Pairing is the term used when two Bluetooth devices are connected wirelessly for the first time.
2. The LED display shows “BT” and flashes quickly.
3. Using the native controls on your Bluetooth Device, select the "EKS213BT" in your Bluetooth setting to pair.
4. When successfully paired, “BT” on LED display will stop flashing.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the devices.
If your device become unpaired, follow the above steps to pair again.
If any pairing issues occur, un-pair the unit
on your Bluetooth device and follow the above steps and try again.
1. Follow the instructions for Pairing a Bluetooth Device.
2. Use the native controls on the connected Bluetooth Device to select a track.
3. To play, pause or skip the selected track, use the native controls on the connected Bluetooth Device.
4. Audio playback from the connected Bluetooth device can now be heard through the speaker.
PLAYING MUSIC VIA BLUETOOTH
1 Press FUNCTION button to toggle to Bluetooth mode.
5. Now go to easykaraoke.com
/youtube for thousands of the best karaoke songs available.
To Next Page
Loading...