Page 9
STOP MODE
If the STOP button is pressed during playback, the disc will cease to play. (The total number of tracks will be shown on the
LED display).
SKIP (FOR BOTH CD & CDG DISCS)
● During STOP mode, you can skip up or down to your desired track by pressing or holding a SKIP button
(
SKIP ).
● To resume playing the selected song, press PLAY/PAUSE button.
SEARCH (FOR AUDIO CD DISC ONLY)
When playing any audio CD, press and hold the SKIP button ( SKIP ). The CD will search at high speed in the
forward or backward direction. Normal play will continue when you release the SKIP button.
REPEAT
● To repeat the track currently playing, press the REPEAT button once. The REPEAT LED will blink.
● To repeat all tracks, press the REPEAT button twice. The REPEAT LED will stay lit.
● To clear the REPEAT function, press the REPEAT button again. The REPEAT LED will turn off.
PROGRAM
● Use this button to program and play back songs in a preselected order.
Step 1: Programming should be done in the stop mode only. Press the PROGRAM button. The PROGRAM
LED will turn on and the LED will read “0“
Step 2: Press the double arrow keys (
SKIP ) to select a desired track.
Step 3: Press PROGRAM Step 2: Press PLAY button when you
have completed programming and you are ready to start singing.
● Press the STOP button to clear all the programmed entries.
DISCO LIGHT FUNCTION
● To illuminate the Disco Light, press the Disco Light ON/OFF button to switch it ON
● Press it again to switch if OFF
KARAOKE FUNCTIONS
Sing along with the music by plugging in the provided microphone into either one of the microphone sockets on the unit.
ECHO
Adjust the ECHO control to enhance your voice for a concert hall effect.
BALANCE
Adjust the
Energy Saving (Auto Power System-APS)
The unit will automatically turn to ‘Standby’ mode in 15 minutes in the following situations:
1) There is no CD in the compartment or the playback of CD has been stopped.
2) No line-in cable plugged into the AUX IN jack.
The unit can be resumed to turn on by pressing the STANDBY button once.
APS is for energy saving purpose.
BALANCE control between the pre-recorded singer’s voice and the music when using a multiplex karaoke disc.
AUTO VOICE CONTROL
AUTO VOICE CONTROL can be activated by the AVC control. The vocals on the multiplex recording will be muted when
the singer starts to sing through the microphone. When the singer stops singing, the vocals will resume to normal.
LINE IN OPERATION
USING LINE IN Connect an audio cable (not included) from the LINE IN Socket on this unit to the external unit’s LINE OUT
Socket. This will allow you to broadcast the external unit’s sound through this unit’s speaker
DISC OPERATIONS
To Next Page
Loading...