EK Quantum Vector2 RE RTX 3080 ABP Set D-RGB User Manual

USER GUIDE
GPU WATER BLOCK WITH ACTIVE BACKPLATE
EK-Quantum
Vector² RE RTX 3080/90 ABP Set D-RGB

EK Quantum Vector2 RE RTX 3080 ABP Set D-RGB Specifications

General

Brand	EK
Model	Quantum Vector2 RE RTX 3080 ABP Set D-RGB
Category	Computer Hardware
Language	English

Summary

Technical Specifications and Water Block Parts (Nickel + Acetal)

Technical Specifications and Water Block Parts (Nickel + Plexi)

Preparing the Graphics Card

Removing the Stock Cooler

Carefully remove the stock cooler, unplugging all LED and fan connectors.

Cleaning the PCB

Wipe off thermal compound and remove stock thermal pads using denatured alcohol.

Preparing the Water Block for Installation

Removing Terminal Badge and Screws

Remove terminal badge, unscrew M4x20 and M3x10 screws as shown in the image.

Cutting and Placing Thermal Pads

Preparing Thermal Pads

Placing Thermal Pads on PCB

Applying Thermal Compound

Applying Thermal Grease

Attaching the GPU PCB onto the Water Block

Aligning and Placing PCB on Standoffs

Installing the Active Backplate

Preparing Thermal Pads for Backplate

Fittings and Tubing

Inserting the Graphics Card into the Chassis

Careful Installation into PCI-E Slot

Connecting the D-RGB LED Strip

Testing the Loop

Performing 24-Hour Leak Test