To Next PageTo Next Page
Need help?Do you have a question about the eka KF 1010 UD and is the answer not in the manual?
Provides overall dimensions, weight, electrical capacity, water pressure, and power supply details.
Details model, voltage, capacity, water pressure, and serial number.
Instructions on how to unpack the appliance and check for damage.
Regulations for disposing of packaging materials environmentally.
Crucial guidelines for placing the oven, including clearance and ventilation.
Detailed steps and safety checks for connecting the appliance to the mains.
Step-by-step instructions for connecting the power cable, including wiring layout.
Requirements for water supply, pressure, and softener for connection.
Advice for first-time use, purpose of the appliance, and general cooking tips.
Warnings about residual heat, hot zones, and electrical safety during operation.
Identifies and explains the function of each component on the control panel.
Steps for initial power-up, including error messages and probe connection.
Details manual and programmed modes, and parameters like time, temp, humidity.
Information on saving and using up to 10 custom cooking programs.
How to use the core probe for precise internal food temperature control.
How the oven operation is affected by opening or closing the door.
Detailed steps for initial cleaning and running the oven empty for the first time.
Explains steam cooking parameters and benefits.
Explains convection cooking, temperature range, and applications.
Explains combined dry and moist heat cooking, temperature and humidity ranges.
Detailed procedure for cleaning the oven's interior, including steam cycle.
How to periodically clean the fans with anti-limescale products.
Instructions for cleaning the door seal for hygiene and functionality.
Recommendations for appliance care when not in use for extended periods.
Step-by-step guide to replace the internal oven lamp.
Instructions for replacing the oven door seal.
Guide to replacing a blown fuse on the printed circuit board.
How to reset the thermal breaker after it has tripped.
Lists common faults, their causes, and corrective actions.
Explains error codes displayed on the panel and their solutions.
Electrical schematic diagram of the appliance's internal wiring.
Information on professional servicing and repairs.
Consumer information regarding waste disposal and environmental protection.
Details of warranty coverage, exclusions, and terms.
Critical warnings for the buyer regarding appliance usage and responsibilities.
General| Category | Oven |
|---|---|
| Model | KF 1010 UD |
| Thermostat | Yes |
| Material | Stainless steel |
| Frequency | 50 Hz |
