EasyManua.ls Logo

eka MILLENNIAL MKF 1011 CTS - User Manual

Default Icon
44 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ORIGINAL OPERATING AND INSTRUCTION MANUAL
ELECTRONIC OVEN WITH TOUCH SCREEN
MKF 464 TS - MKF 511 TS - MKF 611 CTS – MKF 611 VCTS – MKF 623 CTS -
MKF 664 TS – MKF 616 TS – MKF 711 TS – MKF 711 VTS - MKF 1011 CTS
MKF 1011 VCTS – MKF 1064 TS – MKF 1016 TS - MKF 1111 TS –
MKF 1111 VTS - MKF 1664 TS – MKF 2011 TS
MKF 1664 TS – MKF 2011 TS

Table of Contents

Questions and Answers

  • J
    John BrownAug 9, 2025
    Why is my eka MILLENNIAL MKF 1011 CTS control panel totally off?
    • S
      Scott LittleAug 9, 2025
      If the control panel of your eka Oven is completely off, it could be due to a few reasons. First, check the connection to the power mains to ensure it's properly connected. Second, verify that there is voltage present from the mains power supply. If these steps don't resolve the issue, the electronic board protection fuse (with microprocessor) may have blown, and you should contact a skilled technician.
  • J
    James WatkinsAug 14, 2025
    What to do if there is no steam production in the cooking chamber of my eka MILLENNIAL MKF 1011 CTS during steam cycle?
    • G
      Gina MathisAug 14, 2025
      If your eka Oven isn't producing steam during the steam cycle, several factors could be at play. Start by checking the connection to the water mains to ensure it's properly connected. Next, make sure the stopcock is open. Also, inspect the water inlet filter for any obstructions and clean it if necessary. If these steps don't work, the water inlet solenoid valve could be damaged or the steam generator safety thermostat might be activated, in which case you should contact a skilled technician.
  • S
    Sharon JohnsAug 21, 2025
    What to do if my eka MILLENNIAL MKF 1011 CTS Oven does not work when cooking cycle is activated?
    • C
      Cindy SmithAug 21, 2025
      If your eka Oven isn't working when the cooking cycle is activated, it might be because the door is not properly closed. Ensure the door is fully closed. If the issue persists, the magnetic sensor might be damaged, in which case you should contact a skilled technician.
  • B
    Brittany RuizAug 27, 2025
    How to fix steam escaping through the gasket of my eka MILLENNIAL MKF 1011 CTS with closed door?
    • S
      simonjackAug 27, 2025
      If steam is escaping through the gasket of your eka Oven even when the door is closed, it may be due to a non-conforming gasket assembly. Check the gasket assembly. Alternatively, the gasket could be damaged or the handle 'nose' might be loosened, in which case you should contact a skilled technician.
  • E
    Elizabeth GillSep 1, 2025
    Why my eka MILLENNIAL MKF 1011 CTS does not cook evenly?
    • M
      Michael MartinezSep 1, 2025
      If your eka Oven is not cooking evenly, it could be due to one of the motors being locked or turning at a low speed, or the motors may not be reversing direction. In both cases, contact a skilled technician.

Summary

Burn and Injury Hazard

Electric Shock Hazard

Fire Hazard

User Safety

Residual Risks

Wheeled Models Specific Risks

Specific safety precautions for wheeled models (MKF 1664 TS – MKF 2011 TS).

Technical Service

Instructions for the User

Control Panel

Overview of touch screen and knob controls.

Touch Screen Control Operation

How to use the touch screen and its functions.

HOME Screen

The main interface screen and its functions.

Operating Parameters

Details of adjustable cooking parameters like time, temperature, etc.

Additional Functions

Simplified Mode Function

How to use the simplified cooking mode.

Advanced Mode Function

How to use the advanced cooking mode with multiple steps.

Cooking Cycle with Core Probe

Using the core probe for advanced cooking cycles.

Cooking Cycle with Core Probe and ΔT Temperature

Using core probe and ΔT for advanced cooking.

Cooking Cycle with Pre-heating Function

Cooking Cycle with Maintenance Function

Cooking Cycle with Postpone Function

Import;Export from USB to Chef Recipes

Export All Recipes

Import All Recipes

Multi-level Function

Wheeled Models

Glass Down Use

Glass Up Use

Cleaning

Manual Cooking Chamber Cleaning

Daily cleaning of the cooking chamber.

Semi-automatic Cooking Chamber Cleaning

Automatic Cooking Chamber Cleaning

Using the automatic washing system.

Extraordinary Steam Generator Cleaning (Descaling)

Troubleshooting

Possible Alarms

Possible Errors

Technical Support

Conventional Warranty

Availability and Supply of Spare Parts

eka MILLENNIAL MKF 1011 CTS Specifications

General IconGeneral
Voltage220-240 V
Frequency50/60 Hz
Timer120 minutes
MaterialStainless steel
Weight45 kg
Thermostat30°C - 300°C

Related product manuals