eka MILLENNIAL MKF 464 TS

Questions and Answers

S
Shirley ChenAug 4, 2025
Why is my eka MILLENNIAL MKF 464 TS control panel totally off?
- D
  Douglas ThompsonAug 4, 2025
  If the control panel of your eka Oven is completely off, it could be due to a few reasons. First, check the connection to the power mains to ensure it's properly connected. Second, verify that there is voltage present from the mains power supply. If these steps don't resolve the issue, the electronic board protection fuse (with microprocessor) may have blown, and you should contact a skilled technician.
D
dana63Aug 10, 2025
What to do if there is no steam production in the cooking chamber of my eka MILLENNIAL MKF 464 TS during steam cycle?
- J
  james65Aug 10, 2025
  If your eka Oven isn't producing steam during the steam cycle, several factors could be at play. Start by checking the connection to the water mains to ensure it's properly connected. Next, make sure the stopcock is open. Also, inspect the water inlet filter for any obstructions and clean it if necessary. If these steps don't work, the water inlet solenoid valve could be damaged or the steam generator safety thermostat might be activated, in which case you should contact a skilled technician.
M
Mitchell PowersAug 15, 2025
What to do if my eka MILLENNIAL MKF 464 TS does not work when cooking cycle is activated?
- R
  rebecca04Aug 15, 2025
  If your eka Oven isn't working when the cooking cycle is activated, it might be because the door is not properly closed. Ensure the door is fully closed. If the issue persists, the magnetic sensor might be damaged, in which case you should contact a skilled technician.
K
Kenneth AnthonyAug 22, 2025
How to fix steam escaping through the gasket of my eka MILLENNIAL MKF 464 TS with closed door?
- J
  Justin ReedAug 22, 2025
  If steam is escaping through the gasket of your eka Oven even when the door is closed, it may be due to a non-conforming gasket assembly. Check the gasket assembly. Alternatively, the gasket could be damaged or the handle 'nose' might be loosened, in which case you should contact a skilled technician.
S
Sara KellerAug 28, 2025
Why my eka MILLENNIAL MKF 464 TS Oven does not cook evenly?
- L
  Laura SuttonAug 28, 2025
  If your eka Oven is not cooking evenly, it could be due to one of the motors being locked or turning at a low speed, or the motors may not be reversing direction. In both cases, contact a skilled technician.

Summary

General Information and Safety

General Information

Important safety and handling instructions for the appliance.

Safety Warnings and Hazards

Burn and Injury Hazard

Details on high temperatures, hot surfaces, and safe handling of hot food and parts.

Electric Shock and Fire Hazards

Precautions regarding electrical safety, water contact, and fire risks.

User Guidance and Safe Operation

User Safety and Responsibilities

Intended use, supervision, and safety precautions for all users.

Initial Use and Cooking Tips

Guidance on initial operation, maintenance, and best practices for cooking.

Residual Risks and Special Model Notes

Residual Risks Overview

Warnings about potential risks during operation and handling.

Wheeled Model Precautions

Specific safety measures for wheeled models involving tray trolleys.

Technical Service and Control Panel

Technical Service Requirements

Information on qualified installation, maintenance, and repair services.

Control Panel Interface

Introduction to the touch screen display and adjustment knob.

Touch Screen Operation and Display Modes

Touch Screen and Knob Interaction

How to use the touch screen and knob for oven functions and parameter adjustment.

Stand-by and Display Lock

Automatic stand-by activation and reactivation of the oven display.

Touch Screen Display Navigation

Touch and Scroll Actions

Explains touch for confirmation and scroll for selection of functions and parameters.

Display Navigation Examples

Illustrative examples of navigating through menus and selecting languages.

Knob Control for Operation

Knob Interaction Methods

How to press and turn the knob to select and confirm parameters or functions.

Knob Operation Examples

Visual examples demonstrating knob usage for setting cooking parameters.

Interface Symbol Reference

Control and Function Symbols

Explanation of symbols for controls, functions, and operation status.

Recipe and Data Symbols

Meanings of symbols related to recipe saving, browsing, and additional information.

Home Screen Overview

Home Screen Layout

Description of the 'Home' screen sections and active/available functions.

Function Categories

Lists functions categorized as active and available for oven operation.

Core Operating Parameters

Cooking Time and Temperature

Defines parameters for cooking time, temperature, core temperature, and ΔT temperature.

Humidity, Fan Speed, and Modes

Explains humidity control, fan speed, semi-static mode, and humidification/drying operations.

Additional Oven Functions

Pre-heating Function

How to enable and use the pre-heating feature for faster temperature attainment.

Maintenance and Postpone Functions

Details on using Maintenance for warming food and Postpone for delayed start.

Simplified Cooking Mode

Simplified Mode Parameters

Lists settable parameters in simplified mode: time, temperature, fan speed, humidity.

Simplified Mode Operation

Explains setting values, using summary screens, and starting/stopping cooking.

Advanced Cooking Mode

Advanced Mode Parameters

Details on parameters for advanced mode: steps, time, temp, core temp, humidity.

Advanced Mode Operation

How to set parameters, use summary screens, and manage cooking steps.

Advanced Cooking Techniques

Cooking with Core Probe

How to use the core probe for precise internal food temperature control.

Cooking with Delta T

Using Delta T for maintaining a constant temperature difference between food and chamber.

Advanced Mode: Core Probe Operation

Setting Core Probe Parameters

How to set cooking temp, core temp, humidity for core probe cooking.

Core Probe Cooking Examples

Visual examples of setting up and monitoring cooking cycles using the core probe.

Advanced Mode: Core Probe & Delta T

Setting Core Probe & Delta T

Parameters for setting core temp, Delta T, humidity, and fan speed.

Core Probe & Delta T Examples

Visual examples of advanced cooking cycles involving core probe and Delta T.

Advanced Cooking Cycle Functions

Pre-heating Function

How to enable and use the pre-heating function before or during cooking.

Maintenance and Postpone

Using Maintenance for warming food and Postpone for delayed start.

Recipe Management and Storage

Storing Recipes

How to name and save recipes from simplified or advanced modes.

Saving Recipes with Pictures

Steps for adding custom pictures to saved recipes using a USB drive.

Recipe Book Navigation

Accessing Recipe Types

Explanation of Eka Recipes, Chef Recipes, and Most Used Recipes.

Browsing Recipe Categories

How to view dishes divided into 9 categories and access recipe details.

Chef Library Recipe Deletion

Deleting Chef Recipes

Steps to select and confirm the deletion of recipes from the Chef library.

USB Data Transfer for Recipes

Exporting All Recipes

How to export all Chef Recipes to a USB pen drive.

Importing All Recipes

How to import all recipes from a USB pen drive into the Chef Recipes library.

Selective USB Recipe Transfer

Exporting Specific Recipes

How to select and export individual recipes or recipes by category to a USB drive.

Importing Specific Recipes

How to select and import specific recipes from a USB drive into the Chef Recipes library.

Multi-level Cooking Function

Multi-level Operation Setup

How to set parameters and add cooking levels for multi-level cooking.

Multi-level Cooking Execution

Monitoring multi-level cooking, changing parameters, and completing the cycle.

Oven Accessories and Washing System

Accessory Functions Overview

Information on accessory options including Washing system and Proofer/Holding Cabinet.

Washing System Modes

Details on available washing modes: Eco, Normal, Intensive, and Rinse.

Cooling Function

Activating Cooling

Steps to enable the cooling function and display of real-time temperature.

Disabling Cooling

How to manually disable cooling or its automatic deactivation.

Oven Settings Configuration

Display and Time Settings

Adjusting display brightness, time, and date for user preference.

Language, Sounds, and Connectivity

Configuring language, sound alerts, Wi-Fi, and HACCP function.

Wi-Fi Network Connectivity

Selecting Wi-Fi Network

How to find and select available Wi-Fi networks for connection.

Password Entry for Wi-Fi

Procedure for entering the password for protected Wi-Fi networks.

Software Updates and Special Models

Software Update Process

How to activate and manage software updates for the oven's firmware.

Wheeled Model Door Features

Specifics of wheeled models, including internal door glass sliding mechanism.

Door Glass Adjustment and Chamber Cleaning

Door Glass Positioning

Instructions for sliding the internal door glass up or down for different uses.

Manual Chamber Cleaning

Daily cleaning procedures for the cooking chamber using warm soapy water.

Automated Cleaning Procedures

Semi-Automatic Cleaning

Step-by-step guide for semi-automatic cleaning using degreasers and steam.

Automatic Cleaning System

How to activate automatic washing programs and important safety warnings.

Steam Generator Descaling and Fan Cleaning

Steam Generator Descaling

How to descale the steam generator using specific liquids or food-grade vinegar.

Cleaning Oven Fans

Instructions for regular cleaning of the oven fans and fan covers.

Component Cleaning and Inactivity

Gasket, Door, and Casing Cleaning

Specific cleaning instructions for door gaskets, internal/external glass, and casing.

Inactivity Period Preparation

Steps for disconnecting and protecting the appliance during inactivity.

Troubleshooting Common Faults

Control Panel and Cooking Issues

Diagnosing and resolving power, cooking cycle, and steam generation problems.

Door Seal and Motor Issues

Diagnosing steam leaks, uneven cooking, and motor operational problems.

Oven Alarm Codes and Solutions

Probe and Motor Alarms

Alarms for temperature probes, core probe detection, and motor overheating.

Glass Position and Overtemperature Alarms

Alarms for glass positioning, door opening, and general overtemperature.

Overtemperature and Cooling Alarms

Display and Power Card Overtemperature

Alarms E05, E06, E07 indicating overtemperature on electronic boards.

Cooling Function Alarms

Alarm E05 related to cooling function and door status.

Oven Error Codes and Operations

Power Outage and Overtemperature Errors

Errors for power supply issues and overtemperature on display/power cards.

Humidity and Dryer Malfunctions

Errors for humidification or dryer functions and humidity level issues.

Error Codes for Washing and Heating

Washing Cycle Errors

Error W08 for excessive cooking cycles without washing the oven.

Heating Element Errors

Error W09 indicating faulty heating elements or slow temperature rise.

Technical Support and User Information

Technical Support Access

Contacting Tecnoeka for repairs, calibration, and specifying failure details.

End-of-Life Disposal

Information on proper collection and disposal of the appliance at its end of service life.

Warranty, Spare Parts, and Legal

Conventional Warranty Terms

Conditions, exclusions, and duration of the conventional warranty for the product.

Spare Parts and Legal Compliance

Information on spare parts availability and governing Italian law.

eka MILLENNIAL MKF 464 TS Specifications

General

Category	Oven
Model	MILLENNIAL MKF 464 TS
Type	Built-in
Energy class	A
Number of functions	8
Voltage	220-240 V
Frequency	50/60 Hz
Dimensions (HxWxD)	595 x 595 x 575 mm
Color	Stainless Steel
Control type	Touch control
Timer	Yes
Light	Yes
Cooling fan	Yes
Safety lock	Yes
Child lock	Yes
Capacity	64 liters
Door	Triple Glazed