EasyManua.ls Logo

eka MILLENNIAL MKF 711 TS - User Manual

Default Icon
44 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ORIGINAL OPERATING AND INSTRUCTION MANUAL
ELECTRONIC OVEN WITH TOUCH SCREEN
MKF 464 TS - MKF 511 TS - MKF 611 CTS – MKF 611 VCTS – MKF 623 CTS -
MKF 664 TS – MKF 616 TS – MKF 711 TS – MKF 711 VTS - MKF 1011 CTS
MKF 1011 VCTS – MKF 1064 TS – MKF 1016 TS - MKF 1111 TS –
MKF 1111 VTS - MKF 1664 TS – MKF 2011 TS
MKF 1664 TS – MKF 2011 TS

Table of Contents

Questions and Answers

  • J
    Jessica BakerAug 9, 2025
    Why is my eka MILLENNIAL MKF 711 TS control panel totally off?
    • A
      Amanda BarnesAug 9, 2025
      If the control panel of your eka Oven is completely off, it could be due to a few reasons. First, check the connection to the power mains to ensure it's properly connected. Second, verify that there is voltage present from the mains power supply. If these steps don't resolve the issue, the electronic board protection fuse (with microprocessor) may have blown, and you should contact a skilled technician.
  • A
    Anita CochranAug 14, 2025
    What to do if there is no steam production in the cooking chamber of my eka MILLENNIAL MKF 711 TS Oven during steam cycle?
    • A
      Amber FisherAug 14, 2025
      If your eka Oven isn't producing steam during the steam cycle, several factors could be at play. Start by checking the connection to the water mains to ensure it's properly connected. Next, make sure the stopcock is open. Also, inspect the water inlet filter for any obstructions and clean it if necessary. If these steps don't work, the water inlet solenoid valve could be damaged or the steam generator safety thermostat might be activated, in which case you should contact a skilled technician.
  • H
    Heather Taylor MDAug 20, 2025
    What to do if my eka MILLENNIAL MKF 711 TS does not work when cooking cycle is activated?
    • K
      Kelly JohnsonAug 21, 2025
      If your eka Oven isn't working when the cooking cycle is activated, it might be because the door is not properly closed. Ensure the door is fully closed. If the issue persists, the magnetic sensor might be damaged, in which case you should contact a skilled technician.
  • D
    diane82Aug 27, 2025
    How to fix steam escaping through the gasket of my eka Oven with closed door?
    • T
      tbarreraAug 27, 2025
      If steam is escaping through the gasket of your eka Oven even when the door is closed, it may be due to a non-conforming gasket assembly. Check the gasket assembly. Alternatively, the gasket could be damaged or the handle 'nose' might be loosened, in which case you should contact a skilled technician.
  • M
    Madison SmithSep 2, 2025
    Why my eka MILLENNIAL MKF 711 TS Oven does not cook evenly?
    • N
      Nathaniel YoungSep 2, 2025
      If your eka Oven is not cooking evenly, it could be due to one of the motors being locked or turning at a low speed, or the motors may not be reversing direction. In both cases, contact a skilled technician.

Summary

General Information and Safety Precautions

Burn and Injury Hazards

Warnings about hot surfaces, handling hot food, fan covers, and door operation to prevent burns and injuries.

Electric Shock Hazards

Precautions regarding power supply, modifications, earthing, and washing to prevent electric shock.

Fire Hazards

Warnings about flammable foods, checking the cooking chamber, and keeping it clean to prevent fires.

User Guidelines and Operation

User Safety Guidelines

Guidelines for professional use, supervision, child safety, and emergency procedures for safe operation.

Residual Risks

Risks for Wheeled Models

Specific residual risks and hazards associated with wheeled models (MKF 1664 TS, MKF 2011 TS) during operation.

Technical Service and User Instructions

Technical Service

Information on maintenance, repairs, and qualified personnel for appliance servicing and installation.

User Instructions Overview

Touch Screen Operation

Touch Screen Control Operation

Operating Parameters

Additional Cooking Functions

Cooking Modes

Simplified Mode

Guides on setting parameters in "Simplified" mode for single-step cooking, including pre-heating and maintenance.

Advanced Cooking Modes

Advanced Mode

Details setting parameters for multi-step cooking in "Advanced" mode, including pre-heating and postpone functions.

Specialized Cooking Cycles

Core Probe Cooking (Advanced Mode)

Explains how to set parameters for cooking cycles using the core probe in "Advanced" mode.

Advanced Cycles with Probes

Core Probe and Delta-T Cycles (Advanced Mode)

Guides on setting parameters for cooking cycles using core probe and ΔT temperature in "Advanced" mode.

Advanced Function Settings

USB Import;Export Operations

Multi-Level Cooking

Multi-Level Function

Network and Software

Cleaning Procedures

Manual Cooking Chamber Cleaning

Steps for daily manual cleaning of the cooking chamber, preventing residue buildup and corrosion.

Oven Chamber Cleaning

Semi-Automatic Cleaning

Procedure for semi-automatic cleaning using degreaser, steam, and drying cycles for the cooking chamber.

Automatic Cleaning

How to activate automatic washing programs, including safety checks and recommended frequency.

Specialized Cleaning

Steam Generator Descaling

Component Cleaning and Inactivity

Troubleshooting Common Faults

Fault Identification and Solutions

Lists common faults like panel off, cycle not working, steam issues, and uneven cooking with causes and actions.

Alarm Codes and Responses

Alarm Codes E01-E11

Details specific alarm codes (E01-E11), their root causes, impact on operation, and recommended technician actions.

Error Codes and Corrective Actions

Error Codes W01-W09

Details error codes (W01-W09), their causes, operational impact, and recommended technician actions.

Support and Information

Technical Support Contacts

eka MILLENNIAL MKF 711 TS Specifications

General IconGeneral
Brandeka
ModelMILLENNIAL MKF 711 TS
CategoryOven
LanguageEnglish

Related product manuals