eka MILLENNIAL MKF 616 TS

Questions and Answers

J
Jonathan RomeroAug 9, 2025
Why is my eka MILLENNIAL MKF 616 TS control panel totally off?
- T
  Tony AdamsAug 9, 2025
  If the control panel of your eka Oven is completely off, it could be due to a few reasons. First, check the connection to the power mains to ensure it's properly connected. Second, verify that there is voltage present from the mains power supply. If these steps don't resolve the issue, the electronic board protection fuse (with microprocessor) may have blown, and you should contact a skilled technician.
L
loweryjacobAug 15, 2025
What to do if there is no steam production in the cooking chamber of my eka MILLENNIAL MKF 616 TS Oven during steam cycle?
- D
  Diana SimsAug 15, 2025
  If your eka Oven isn't producing steam during the steam cycle, several factors could be at play. Start by checking the connection to the water mains to ensure it's properly connected. Next, make sure the stopcock is open. Also, inspect the water inlet filter for any obstructions and clean it if necessary. If these steps don't work, the water inlet solenoid valve could be damaged or the steam generator safety thermostat might be activated, in which case you should contact a skilled technician.
J
jennahunterAug 20, 2025
What to do if my eka Oven does not work when cooking cycle is activated?
- D
  Donald HollandAug 20, 2025
  If your eka Oven isn't working when the cooking cycle is activated, it might be because the door is not properly closed. Ensure the door is fully closed. If the issue persists, the magnetic sensor might be damaged, in which case you should contact a skilled technician.
S
Stephanie HernandezAug 27, 2025
How to fix steam escaping through the gasket of my eka Oven with closed door?
- N
  Nicole LewisAug 27, 2025
  If steam is escaping through the gasket of your eka Oven even when the door is closed, it may be due to a non-conforming gasket assembly. Check the gasket assembly. Alternatively, the gasket could be damaged or the handle 'nose' might be loosened, in which case you should contact a skilled technician.
X
xespinozaSep 1, 2025
Why my eka MILLENNIAL MKF 616 TS does not cook evenly?
- N
  Nathan Wade PhDSep 2, 2025
  If your eka Oven is not cooking evenly, it could be due to one of the motors being locked or turning at a low speed, or the motors may not be reversing direction. In both cases, contact a skilled technician.