EasyManua.ls Logo

eka MKF 711 BM - User Manual

Default Icon
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
fffffssdsdsdsdsdsELECTRONIC BLACK MASK OVENS
TRANSLATION OF ORIGINAL INSTALLATION AND
MAINTENANCE MANUAL
ELECTRONIC BLACK MASK OVENS
MKF 464 BM- MKF 416 BM - MKF 511 BM - MKF 611 CBM
MKF 623 CBM - MKF 664 BM – MKF 616 BM – MKF 621 BM – MKF 711 BM
MKF 1011 CBM - MKF 1064 BM – MKF 1016 BM – MKF 1111 BM
MKF 1021 BM – MKF 1664 BM – MKF 2011 BM

Table of Contents

Questions and Answers

  • S
    Shane HicksAug 10, 2025
    Why is the control panel of my eka MKF 711 BM totally off?
    • J
      Jennifer CrossAug 10, 2025
      If the Eka Oven's control panel is completely off, it could be due to a few reasons: * There might be a non-compliant connection to the power mains. In this case, check the connection to the mains. * There might be no mains voltage. If this is the case, restore the power supply voltage. * The electronic board protection fuse (with microprocessor) might be blown. If you suspect this, contact a skilled technician.
  • A
    awashingtonAug 18, 2025
    What to do if there is no humidity/steam in my Eka Oven?
    • Y
      ysimsAug 18, 2025
      If there is no humidity or steam production in the cooking chamber of your Eka Oven when the humidity/steam cycle is activated, consider the following: 1. Check the connection to the water mains to ensure it's compliant. 2. Verify that the stopcock is open. 3. Inspect and clean the water inlet filter if it's obstructed. 4. If the water inlet solenoid valve is damaged, contact a skilled technician.
  • M
    Michael AndersonAug 25, 2025
    What to do if my eka MKF 711 BM doesn't work during the cooking cycle?
    • D
      Debbie AndersonAug 26, 2025
      If your Eka Oven doesn't work while the cooking cycle is on, it could be due to: * The door being open or ajar. Make sure to close the door properly. * A damaged magnetic sensor. In this case, contact a skilled technician.
  • J
    Joan CalhounSep 1, 2025
    Why is steam escaping from the eka MKF 711 BM Oven door gasket?
    • P
      Paula SheaSep 1, 2025
      If steam escapes through the gasket of your Eka Oven when the door is closed, the cause may be: * Non-compliant gasket assembly. Check the gasket assembly. * Damaged gasket or loosened handle "nose". In both cases, contact a skilled technician.

Summary

Installation Instructions

Installation Location

Requirements for selecting and preparing the installation location.

Table Top Oven Placement

Instructions for placing table top ovens horizontally on stable surfaces.

Floor-Standing Oven Placement

Procedures for positioning floor-standing ovens and trolleys correctly.

Electrical Connection

Requirements for connecting the appliance to the electrical power network safely.

Power Supply Cable Connection

Mains Connection Types

Details on connecting different oven models to various power supply types.

Water Mains Connection

Requirements for connecting the appliance to the water supply.

Water Inlet for Steam

Water Inlet for Washing

Water Drain Connection

Guidelines for connecting the appliance's drain pipes to the disposal system.

Floor Oven Water Drain

Tabletop Oven Water Drain

Steam Drain

Maintenance Instructions

Safety Thermal Device

Electronic Circuit Protection

Replacing Cooking Chamber Gasket

Gasket Seal Check

Troubleshooting

Possible Alarms

Technical Support

eka MKF 711 BM Specifications

General IconGeneral
ModelMKF 711 BM
CategoryOven
TypeBuilt-in
Energy Efficiency ClassA
Capacity71 liters
Voltage220-240 V
Frequency50/60 Hz
Dimensions (H x W x D)595 x 595 x 575 mm
ColorBlack
MaterialStainless Steel
TimerYes
Child LockYes
Cooling FanYes
LightingYes
Warranty2 years
DoorTriple Glazed
Control TypeTouch Control

Related product manuals