17
4.6 Turning On and O
4.5 Charging
Do not use while
charging
1. Connect the CORE 500™ to a power source using the included USB-C cable and a
power adapter (not included).
2. The battery indicator shows the charge percentage.
The battery life is subject to use and is expected to last for five hours of continuous use. It takes
approximately three hours to fully charge the device from 0%.
The CORE 500™ should be periodically recharged even when in storage. Lithium ion batteries slowly lose
charge when in storage and may fall to an unacceptably low level, damaging the battery.
NOTE: The CORE 500™ will not operate or connect to the Eko App while charging.
Turn On
Pick up the device by placing your fingers around the space between the device face and electrodes.
The CORE 500™ will turn on automatically.
Or, press the top button to turn on the CORE 500™.
Sleep
The 500™ automatically sleeps when not touched for 15 seconds.
Pick it up by the neck of the chestpiece to turn it on. You can turn o this setting in
the Eko App.
Turn o
Hold the top button while pressing the volume-up button once to turn it o.
Once you see the confirmation screen, press the volume-up button again to confirm.
Top Button
Volume
Up Button
To Next Page
Loading...
