EKO INSTRUMENTS CO., LTD. - Pyranometer MS-80/80S/80U - Instruction Manual Ver. 1
Pg. 59
A4-7. No. 0-49 Register details
・ The register map changes depending on the register type setting. The following table shows 4 register
maps.
・ See in parentheses for the unit.
・ Fixed value if the content is numeric.
・ The blank space is not used. It is filled with zero in U16 format.
・ The abbreviations are as follows.
Addr: Modbus slave address (1-247)
Comp Irr: Irradiance value after compensation of temperature and linearity.
Raw.Irr: Irradiance before correction
Temp: Sensor temperature
AD: Input voltage
Sensitivity: Calibration factor
Cal. Date: Calibration date
Supply: Supply Voltage
Sensor Name: Sensor name (MS-80S)
Firm Ver: Firmware version number
Hard Ver: Hardware version number
T. Coeff: Temperature compensation factor, set by No.174-181
L. Coeff: Linearity compensation factor, set by No.182-189
To Next Page
Loading...
