ekwb EK-Vardar X3M 120ER - Installing the Fan on the Radiator; Installing the Fan Directly

- 4 -
INSTALLING THE FAN ON THE RADIATOR
Take the four encosed UNC 6-32 x 10 (10 mm long) screws for each
fan and screw them in. The number of enclosed screws depends
on the radiator model. Use the enclosed Allen key to tighten the
screws in a clockwise direction. Don’t use excessive force while
tightening the screws.
UNC 6-32 x 10 Screw
INSTALLING THE FAN DIRECTLY
Using the enclosed mounting screws and thumb nuts you can mount
the EK-Vardar X3M fan directly to your chassis or any other standard
fan mounting location.
EK-Vardar X3M 120ER
UNC
6-32 x 10
Thumb
Nut