Need help?Do you have a question about the ELAC Miracord 10 and is the answer not in the manual?
Guidance on mounting the chassis onto a wooden board, ensuring correct cutout and smooth edges.
Instructions for carefully placing the turntable onto the axis, avoiding damage to the ball bearing.
Details on connecting the 2-wire mains lead for 220/240 volts AC, 50 cps.
Steps for connecting the tone arm head and counterbalance to the tone arm.
Guidance on adjusting stylus force using the calibrating weight, between 2 and 6 grams.
Adjusting tone arm height and landing point for optimal cartridge performance and record tracking.
Instructions for using the unit as a record changer, including stacking and automatic dropping of records.
How to use the unit as an automatic turntable for single records or repeated play.
Explanation of how the unit automatically shuts off after the last record or when the stop button is pressed.
Information on connecting the pickup cartridge, including wire colors and polarity.
Details on the unit's lubrication-free design and when to seek professional servicing.
Advice on needle wear, sound impairment, groove damage, and timely replacement.
Details on STEREOTWIN STS 220 and STS 310 cartridges, including specifications and features.
To Next Page
General
