Description of operating controls and connecting terminals Page 14 of 20
7 ELAC WIRELESS INTERFACE SOCKET
Input jack for connecting the optionally available ELAC wireless receiver dongle. With this dongle, your subwoofer
will become a wireless powered subwoofer. By using the ELAC wireless technology, you can avoid installing long
RCA cables through your room.
Interesting: If you don’t want to use the ELAC wireless technology, you can divert the USB socket. from its in-
tended use, e.g. to charge your mobile phone or mp3 player. Just connect the charging cable of your device to this
USB connector and your device will be charged.
8 POWER SOCKET
Please insert the IEC end of the mains power cable here.
9 FUSE HOLDER
When replacing fuses, make sure to use appropriate fuses (please refer to the information given on the rear of the
speaker).
ATTENTION: Complete disconnection of the ELAC SUB 2030 subwoofer from the mains is ensured only
by pulling out the power plug. The power plug or the device plug have to be easily accessible! While the
device is plugged in and the power switch is switched on, a static current will flow even in standby mode
(indicated by the LED glowing red).
To Next Page
Loading...
