Magic 260
14
Section 11: Choose Fixtures (Continue)
(3) You will get a momentary 3 second warning in the LCD that reads as follows:
THIS FIXTURE DOES NOT MATCH
RECORD & PATCH MEMORY ?
Followed by:
DO YOU WISH TO CONTINUE?
YES NO
The reason f or this message is the internal memory does not recogniz e the n ewly
sel ected fixture as being pa rt of any Scenes or Shows curr ently s tor ed in the consol e.
This warning appears each time a fixture is changed i n the “ Choose Fixtur es” menu
option. You w ou l d only ever p r es s DATA wheel # 2, for NO , if you chang ed your fixture
setti ng acciden tally. Selecting “NO” would ca ncel the change a nd your previ ous ly set
fixture would not change.
(4) Press DATA wheel #1 to select “YES”. DONE will momentarily appear in the display to confirm that the
newly selected fixture has been set.
(5) To choose your next fixture, turn DATA wheel #1, below “FIXTURE 01” clockwise, to access Fixture
#2. Your display should read as follows:
Fixture Type
02 NO FIXTURE
(6) Repeat steps 3, 4 & 5 to choose the remainder of your fixtures. When finished, press the “MENU”
button two times to exit. Magic 260’s display should return to the home screen.
To Next Page
Loading...
