Need help?Do you have a question about the Elation SHOW DESIGNER 2CF and is the answer not in the manual?
General| Number of DMX Universes | 2 |
|---|---|
| DMX Channels | 1024 |
| Protocols | DMX512, Art-Net |
| Supported Protocols | DMX512 |
| Features | fixture library, effects generator |
| Type | Lighting Controller |
| Effects | Effects Generator |
| Dimensions | 19" x 7" x 3.5" (482.6mm x 177.8mm x 88.9mm) |
Device must be used by authorized personnel; improper use voids warranty.
Use in dry locations, avoid liquids, flammable materials, extreme environments, and ensure proper handling.
Device should be operated by qualified and trained professionals only.
Explains how to navigate menus using switches and data wheels to select and edit settings.
Select lighting fixtures from the library, load profiles, or set auto patch for DMX addressing.
Manually set DMX starting addresses and ports for fixtures or use auto patch.
Modify attributes like name, channels, black channel, pan, tilt, and crossfade mode for fixtures.
Back up the controller memory to a PC via the RS-232 port.
Restore controller memory from a backup file on a compact flash card.
Update the Show Designer 2CF software using a file on a compact flash card.
Lock or unlock the controller's memory to prevent unauthorized changes.
Back up the entire controller memory to a compact flash card.
Clear all data, settings, scenes, presets, and shows from the controller.
Select individual fixtures for direct control using faders, wheels, or joystick.
Adjust channel values, settings, and navigate menus for programming and control.
Control individual fixture channels or act as scene masters for crossfading.
Blackout all fixtures or clear the scene buffer with its "Clear All" function.
Save the current stage look, including channel levels, chases, and presets, as a scene.
Play back scenes individually, with channels fading or snapping to new settings.
Small memories for colors, gobos, focus, or effects used as building blocks for scenes.
Capture specific channel settings like color or gobo to create reusable presets.
Play back presets, layering them onto scenes or applying them to selected fixtures.
Create chases by recording channel levels, presets, steps, speed, fade, and names.
Create shows by sequencing scenes, setting hold times, and defining playback attributes.
Use faders to manually crossfade between scenes or run up to 8 scenes simultaneously.
Update the controller's software using a file from a CF card.
To Next Page
