EasyManua.ls Logo

Elation SNIPER 2R - Lamp Installation Instructions

Elation SNIPER 2R
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.elationlighting.com
11 SNIPER 2RUser Manual ver 3
LAMP INSTALLATION INSTRUCTIONS
LAMP REPLACEMENT
Please note that due to the nature of the PhillipsPlatinum 2R
Lamp and the optical path of the Elation SNIPER 2R fixture, the
lamp MUST BE replaced at 6,000 hours.
Use only Genuine Original PhillipsPlatinum 2R Lamps. Other
brand lamps may cause damage and void warranty!
INSTALLING OR REPLACING THE LAMP
To ensure a proper/safe lamp change, carefully read all the following instructions.
LAMP SAFETY INSTRUCTIONS
ALWAYS replace lamp after 6,000 Hours.
Use only Genuine Original Phillips™ Platinum 2R lamps. Other brand lamps may
cause damage and void the warranty!
NEVER touch the lamp with your bare hands, as the oil from your hands will
shorten the life of the lamp.
Always disconnect the fixture’s main power supply before replacing lamp.
Allow fixture to cool for at least 15 minutes before attempting any type of service.
Make sure ALL covers/panels are replaced/secured before operating the fixture
to prevent any risk and/or damage to eye retina from UV Radiation exposure!