www.elationlighting.com
20 SNIPER 2R™ User Manual ver 3
FIXTURE INSTALLATION
FLAMMABLE MATERIAL WARNING
Keep fixture at least 5.0 ft. (1.5m) away from any
flammable materials, decorations, pyrotechnics, etc.
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all
electrical connections and/or installations.
CAUTIONS
• For added protection, mount the fixture in areas outside walking paths, seating
areas, or in areas were unauthorized personnel might reach the fixture.
• Max ambient operating temperature for this fixture is 104°F. (40°C)
Do not use the fixture under or above this temperature.
• Before mounting the fixture to any surface, make sure the installation area can
hold a minimum point load of 10 times the weight of the fixture. (210 lbs / 95 kg)
• Fixture installation must always be secured with a secondary safety attachment,
such as an appropriate safety cable.
• Never stand directly below the device when mounting, removing or servicing.
POWER LINKING
Max number of units that can be power linked is 7 units @120V / 14 units @230V.
WARNING
MINIMUM distance to lighted objects must be 16.5 feet (5m)
MAXIMUM temperature of external surface 194° F (90° C)
MINIMUM distance of inflammable materials from surface 1.6 feet (0.5m)
Keep fixture at least 5.0 feet (1.5m) away from any flammable
materials, decorations, pyrotechnics, etc.
To Next Page
Loading...
