ELAUT Mistral - Error Codes and Troubleshooting; Dispenser Errors; Configuration Mismatches; Playfield Chip Count Errors

13
Display code: 9
This warning appears when dispenser 2 doesn‟t paid out,
possible the dispenser is empty or obstructed.
Display code: 10
This warning appears when dispenser 3 doesn‟t paid out,
possible the dispenser is empty or obstructed.
Display code: 11
The proportion between purchase price, percentage and
points value are not correct in regard to other settings.
Display code: 12
If the payout, number of chips on the playfield, is not
between the 65 and 125 pieces.
Display code: 13
The dispenser is almost empty. Only if you fill the
dispensers with the refill function.
Display code: 14
The refill function can be used again after closing and re
open the door.
Display code: 31
No communication with the Linker module.
Display code:32
No communication with the carrousel controller.
Display code:33
Mechanical counters are not connected.
Display code:34
No communication with the hopper module
Display code:35
No communication with the motor module.
ERRORS AND WARNINGS
prize disp.2
emptyPress S to
resume
FOUTEN EN WAARSCHUW
linker mod. status
Press S to resume
ERRORS AND WARNINGS
carrousel status
Press S to resume
ERRORS AND WARNINGS
meters disconnect
Press S to resume
ERRORS AND WARNINGS
hopper mod status
Press S to resume
ERRORS AND WARNINGS
prize disp.3
emptyPress S to
resume
ERRORS AND WARNINGS
reopen window first
Press S to resume
ERRORS AND WARNINGS
motor mod status
Press S to resume
ERRORS AND WARNINGS
prizes/field n corr
Press S to resume
ERRORS AND WARNINGS
product def n corr
Press S to resume
ERRORS AND WARNINGS
prizes low al.
Press S to resume