Display code:36
No communication with the controls module.
Display code:37
No communication with the display module.
Display code:38
Problem with the escalator hopper, can be obstructed or
didn‟t pay in time.
Display code:39
Problem with the escalator hopper sensor. No sensor
connected or obstructed.
Display code:40
Problem with the movement of the carousel.
Display code:41
The payout of the chips is not between the 65 and 125
pieces on the playfield.
Display code:42
The payout of the chips is not between the 65 and 125
pieces on the playfield.
Display code:43
Too many or too little chips on the playfield.
Display code:44
The carrousel is locked, unlock this in the menu “dispenser
setting x “ by pressing S in front of the line “refill lock”, this
should be on OFF.
ERRORS AND WARNINGS
controls mod status
Press S to resume
ERRORS AND WARNINGS
display mod status
Press S to resume
ERRORS AND WARNINGS
escalator timeout
Press S to resume
ERRORS AND WARNINGS
carrousel motor
Press S to resume
ERRORS AND WARNINGS
escal. coin sensor
Press S to resume
ERRORS AND WARNINGS
lower point values
Press S to resume
ERRORS AND WARNINGS
higher point values
Press S to resume
ERRORS AND WARNINGS
payout calculation
Press S to resume
ERRORS AND WARNINGS
refill lock on
Press S to resume
To Previous Page
Loading...
