46
O V EN F ITTING O UT
• Assemble the wire racks to the oven walls using the 2 screws (g. 9.1).
• Slide in, on the guides, the shelf and the tray (g. 9.2).
The shelf must be tted so that the safety catch, which stops it sliding out, faces the
inside of the oven.
Some models only: The shelf must be tted so that the safety catch, which stops it
sliding out, faces the inside of the oven; the guard rail shall be at the back.
• To dismantle, operate in reverse order.
Stop notch
Fig. 9.2
Fig. 9.1
Guard rail
(Some models
only)
To Next Page
Loading...
