12
Delivery scope
Standard version
Accessories
Standard version
The delivery scope of a boiler consists
of the following components:
Components Packaging type
Completely assembled and tested boiler 1 In cardboard box
Mounting rail 1 In boiler packaging, mounted on back side of the boiler
Connectors 1 Separate cardboard box in the boiler packaging
Outdoor sensor 1 Separate cardboard box in the boiler packaging
Room unit 1 Separate cardboard box in the boiler packaging
Cylinder sensor (not for THISION S PLUS Combi) 1 Separate cardboard box in the boiler packaging
Operating manual THISION S PLUS / Combi technician 1
In document bag in boiler packaging
Operating manual THISION S PLUS operator 1
Replacement part list 1
ERP label 1
Accessories
The following accessories can be
ordered:
- Flue gas pipes
- Sludge separator
- 3-way valve set (only for the types
34, 46 and 54)
- Expansion module AGU2.550,
for controlling a mixed heating
circuit, or for control on an air
supply ventilator and/or external
gas valve, in combination with
an alarm terminal. A maximum
of 3 AGU2.550 modules can be
installed;
- Additional control unit LOGON
B G2Z2, in case of more than 3
makes heating circuits, (incl. wall
housing, all required sensors and
plugs, as well as the necessary
material for bus communications).
Listed accessory parts have been a
specially constructed or selected for
the THISION S PLUS boiler, which
means they are very easy to install
(plug and play). You can compose your
own system solution, by selecting the
accessorycombinationthattsyour
needs. For details and prices, please
take a contact with the Elco Sales
Department.
To Next Page
Loading...
Need help?
General