Need help?Do you have a question about the elco RENDAMAX 30 and is the answer not in the manual?
List and identification of parts within the RENDAMAX 30 burner unit.
Explanation of how the heat exchanger and control unit operate.
Items included with the RENDAMAX 30 burner and available accessories.
Requirements for chimney and exhaust systems, including installation and material specifications.
Installation and routing of condensation pipes to the sewage system.
Minimum distances, installation site requirements, and gas connection checks before assembly.
Overview of different air and exhaust system configurations and designs.
Details on different types of air and exhaust system designs and their requirements.
Explanation and illustration of exhaust system configurations dependent on ambient air.
Steps for installing the burner, including cover removal and reassembly procedures.
Detailed instructions on how to remove and reattach the burner unit's covers.
Procedures for connecting the burner and filling the heating system, including venting.
Guidelines for electrical connection and wiring of the burner unit by qualified electricians.
Details on the circulating pump's operation, settings, and performance characteristics.
Steps involved in safely removing and refitting the burner unit's covers.
Procedures for cleaning the burner, blower, and heat exchanger components.
Detailed checklist and procedures for annual maintenance of the RENDAMAX 30 burner.
Explanation of error codes, symbols, and troubleshooting steps for the KM 628 control unit.
To Next Page
General