To Next PageTo Next Page
Need help?Do you have a question about the elco THISION L and is the answer not in the manual?
Defines the intended use and limitations of the boiler for heating and hot water production.
Lists applicable European and national standards for installation and operation, including safety requirements.
Provides essential information and responsibilities for installers and maintenance personnel regarding safe operation.
Highlights critical safety warnings and essential checks required before proceeding with boiler installation.
General guidance on boiler positioning, clearance requirements, and frost-proof room installation.
Explains how to make hydraulic, condensate, and gas connections to the boiler according to standards.
Discusses regulations, materials, and requirements for air/flue gas system components for safe operation.
Details electrical connection requirements, including mains isolator switch and earthing.
Explains how to fill and check the water and hydraulic system, including quality parameters and pressure.
Instructions for checking gas supply connection, tightness, and type for safe commissioning.
Step-by-step guide for the initial startup of the boiler, including electrical and hydraulic checks.
Procedures for checking and adjusting combustion settings at full and minimum load.
Methods for checking water flow rate using AT and Ap measurements to ensure proper circulation.
Procedures to check the functionality and operation of various safety devices connected to the boiler.
A comprehensive checklist of essential maintenance activities to be performed annually for optimal operation.
Lists lockout error codes, their descriptions, and potential causes for troubleshooting.
General