elco THISION S PLUS User Manual

12
Delivery scope
Standard version
Accessories
Standard version
The delivery scope of a boiler consists
of the following components:
Components Packaging type
Completely assembled and tested boiler 1 In cardboard box
Mounting rail 1 In boiler packaging, mounted on back side of the boiler
Connectors 1 Separate cardboard box in the boiler packaging
Outdoor sensor 1 Separate cardboard box in the boiler packaging
Room unit 1 Separate cardboard box in the boiler packaging
Cylinder sensor (not for THISION S PLUS Combi) 1 Separate cardboard box in the boiler packaging
Operating manual THISION S PLUS / Combi technician 1
In document bag in boiler packaging
Operating manual THISION S PLUS operator 1
Replacement part list 1
ERP label 1
Accessories
The following accessories can be
ordered:
- Flue gas pipes
- Sludge separator
- 3-way valve set (only for the types
34, 46 and 54)
- Expansion module AGU2.550,
for controlling a mixed heating
circuit, or for control on an air
supply ventilator and/or external
gas valve, in combination with
an alarm terminal. A maximum
of 3 AGU2.550 modules can be
installed;
- Additional control unit LOGON
B G2Z2, in case of more than 3
makes heating circuits, (incl. wall
housing, all required sensors and
plugs, as well as the necessary
material for bus communications).
Listed accessory parts have been a
specially constructed or selected for
the THISION S PLUS boiler, which
means they are very easy to install
(plug and play). You can compose your
own system solution, by selecting the
accessorycombinationthattsyour
needs. For details and prices, please
take a contact with the Elco Sales
Department.

elco THISION S PLUS Specifications

General

Model	THISION S PLUS
Category	Boiler
Fuel Type	Natural Gas, LPG
Installation	Wall-mounted
Heat exchanger material	Stainless Steel
Water Pressure	Max 6 bar
Available models	THISION S PLUS 35
Weight	34 kg to 36 kg