56
Registration mode Euro-2000T Alpha © Elcom Ltd.
4.4.5 Successive multiplication entries into departments
The cash register can be preprogrammed for successive price multiplication. The function is practical, for
example, when entering a sale of items sold by area (square meter).
Example: The price is determined for the square meter. Your customer buys 3 by 5 square meters.
Step No. Key operation
1.
3 K
2.
5 K
3.
3120 <
Print:
DPT 2 I
3x5x31.20 =468.00
Warning: The function must be preprogrammed (2nd system flag digit No. 6=1)
4.4.6 Single item entries into departments
Example: In some services it is often to necessary to sell a single item (cigarettes). To simplify the sale of such
items, it is possible to program the price in the department. By pressing the department button the
item is automatically registered, the sale is automatically finished and the drawer is automatically
opened. This group is called a single item group. In the following example, the price of 50,70 in the
DPT 4 is preprogrammed.
Step No. Key operation
1.
>
Print:
DPT 4 I
1x50.70 =50.70
-----------------------------
TAXABLE VAT 6%
50.70
VAT 6% 2.90
VAT TOTAL 2.90
TOTAL 50.70
-----------------------------
CASH 50.70
Note: If other transactions have already been
performed before a single item sale, final-
ization of the transaction is not concluded
and it is possible to continue registra-
tion of other items.
4.4.7 Overwriting of the preprogrammed price with the department entries
Either the programmed price or a price entered from the keyboard may be used for department entries. If
a price is entered from the keyboard, it supercedes the programmed price.
Example: The customer was given a special price different from the programmed one. In the following example
the DPT 4 has the preprogrammed price of 30,90. The special price is 28,90.
To Next Page
Loading...
