Elcometer 266 - Table of Contents

1
Working Safely
2
Gauge Overview
3
Box Contents
4
Using the Gauge
5
Getting Started
6
High Voltage Probe Handle
7
Preparing for Test
8
Test Procedure
9
Setting the Probe Handle Voltage
10
Setting the Sensitivity
11
Static Electricity
12
Probe Accessory Selection
13
The Second Hand Grip
14
Special Considerations
15
Error Messages
16
Spares & Accessories
17
Warranty Statement
18
Technical Specification
19
Care & Maintenance
20
Legal Notices & Regulatory Information
21
Appendix A: Standards
22
Appendix B: Calculating The Correct Test Voltage
For the avoidance of doubt, please refer to the original English language version.
Kit Dimensions: 520 x 370 x 125mm (20.5 x 14.5 x 5”)
Weight: Base Unit (including battery pack): 1.2kg (2.7lb); Handle: 0.6kg (1.3lb)
Base Unit, Handle & Connecting Cable: 2kg (4.4lb)
A Material Safety Data Sheet for the Elcometer 266 Battery Pack is available to download via our website:
http://www.elcometer.com/images/stories/MSDS/elcometer_266_280_battery_pack.pdf
© Elcometer Limited 2010-2016. All rights reserved. No part of this document may be reproduced, transmitted,
transcribed, stored (in a retrieval system or otherwise) or translated into any language, in any form or by any
means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written permission of
Elcometer Limited.
CONTENTS
www.elcometer.com
en-1
R