Elcometer 266 - Page 31

16 SPARES & ACCESSORIES (continued)
‘C-Type’ Wire Brushes
Part Number
Outside Diameter
Part Number
Outside Diameter
DN
NPS
DN
NPS
T99922745-1
150 - 250mm
6 - 9"
T99922745-6
650 - 750mm
24 - 28"
T99922745-2
250 - 350mm
9 - 12"
T99922745-7
750 - 850mm
28 - 32"
T99922745-3
350 - 450mm
12 - 16"
T99922745-8
850 - 950mm
32 - 36"
T99922745-4
450 - 550mm
16 - 20"
T99922745-9
950 - 1050mm
36 - 40"
T99922745-5
550 - 650mm
20- 24"
T99922745-10
1050 - 1150mm
40 - 44"
16.10 CONDUCTIVE RUBBER PROBES
Complete Assembly
Spare Electrode Only
Part Number
Width
Part Number
Width
T99920022-11
250mm (9.8")
T99926731
250mm (9.8")
T99920022-12
500mm (19.7")
T99926732
500mm (19.7")
T99920022-13
1000mm (39")
T99926733
1000mm (39")
T99920022-14
1400mm (55")
T99926734
1400mm (55")
16.11 ROLLING SPRINGS
Available in phosphor bronze or stainless steel,
each spring is supplied with an easy release
coupling piece allowing users to quickly connect
and disconnect the rolling spring at stanchions,
pillars, etc.
Rolling springs are not supplied with a holder as standard. Please
order the appropriate holder separately.
The 19mm (0.75") diameter phosphor bronze springs are almost three
times lighter than the 34mm (1.33") diameter stainless steel springs.
Description Part Number
Phosphor Bronze Rolling Spring Holder T99920086
Stainless Steel Rolling Spring Holder T99922746
www.elcometer.com
en-30
R