R
2
Thank you for your purchase of this Elcometer Viscosity Dip Cup. Welcome to Elcometer.
Elcometer are world leaders in the design, manufacture and supply of inspection equipment for coatings
and concrete. Our products cover all aspects of coating inspection, from development through application
to post application inspection.
This Elcometer Viscosity Dip Cup is a world beating product. With the purchase of this Viscosity Dip Cup
you now have access to the worldwide service and support network of Elcometer. For more information visit
our website at www.elcometer.com
1 ABOUT YOUR VISCOSITY DIP CUP
Elcometer Viscosity Dip Cups are easy-to-use gauges for rapid measurement of viscosity of liquids.
The cup is held by its handle and is dipped into the liquid to be measured. The cup is removed from the
liquid and the time taken for the liquid to drain through an orifice in the bottom of the cup is measured.
The measured kinematic viscosity is generally expressed in seconds (s) flow time, which can be converted
to Centistokes (cSt). A wide range of cups with different orifices is available for measurements between
2 cSt and 1840 cSt.
1.1 THESE INSTRUCTIONS
These instructions describe the operation of the following Elcometer Viscosity Dip Cups:
Elcometer 2210: Zahn
Elcometer 2215: Lory LCH
Elcometer 2310: Shell
Elcometer 2434/5/6/7: Frikmar
2210_TMA_0317_00_05.fm Page 2 Thursday, July 15, 2010 9:38 AM
To Next Page
Loading...
