Select either of the first two options to enable Windows Update reconnect your
SPC device to a spare USB port. If the PC is connected to the web, the drivers will
now load.
If the above option is not present, proceed as follows:
Ensure that your SPC Device is connected to the PC
Ensure the CD Minidisk supplied with your SPC device is installed in the CD drive of your
PC
Open “Control Panel” from the Windows ‘Start’ button.
In XP, select ‘System’ and click the ‘Hardware’ tab, and then ‘Device Manager’.
From the Device Manager list, select ‘Other Devices’. Note: There will be a yellow
warning triangle showing, which may be identified as ‘SPC Pro’. Click on the yellow
triangle, and click ‘Update Driver’
Select the option which allows the driver to be installed from a location on the PC
(not the automatic search).
Browse to the CD location [DRIVE]:\V.*.**.**\SPC----Drivers\ and click ‘next’.
Please note: if you have downloaded the drivers from the web, you will need to
browse to the location that you saved them to.
Click install, and exit when complete. Note: It may be necessary to load a second
driver for the COM port. If the Device Manager list shows a second yellow triangle,
click on this and repeat the above procedure.
To Next Page
Loading...
