9.3 Motor’s behavior adjustment
The motorcycle is equipped with 3 driving maps which you can
select by the map button.
PUSH - MAP 0 (WHITE LED)
The Map 0 is a security map, you have to push the map button to
select the Map 1
ESCAPE /
1 – TREK (GREEN LED)
Trek mode is dedicated to Trek use, acceleration is smooth up to the
max speed
2 - TRIAL 1 (BLUE LED)
TRIAL 1 map is dedicated to wet condition, acceleration is smooth up
to max speed.
3 - TRIAL 2 (RED LED)
TRIAL 2 map is dedicated to trial use, in dry condition and 100% of the
performance of the motorcycle.
EPURE Lite, Sport, Race /
1 - TRIAL 1 (GREEN LED)
TRIAL 1 map is dedicated to hard conditions and where traction is
needed. Acceleration is smooth up to max speed.
2 - TRIAL 2 (BLUE LED)
TRIAL 2 map is dedicated to dry trial use, more powerful and more
response for trial use.
3 - TRIAL 3 (RED LED)
TRIAL 3 map is the most powerful map of the motorcycle with 100%
of the performance.
Driving too fast or aggressive can cause overheating problems.
Make sure you are aware of the motorcycle different
behaviors when changing maps before using them in traffic/open
roads. These changes in behavior could surprise an uninformed
driver.
To Next Page
Loading...