Shift PELS – PRB :
To use the lever in PELS or PRB mode depending on what you want,
you need :
- Remove the cover
- Remove the “shunt” connector corresponding to the
mode you want to use (sticker « PELS » or « PRB »), with a
thin tool
- Unplug the plug which is connected, and plug the one you
want.
- Don’t forget to reconnect the “shunt connector” on the
plug which is not used
-
9.6 Clutch (RACE model)
The RACE model is equipped with multi-dic clutch with hydraulic
command who allow to uncouple the motor from the transmission.
It can be very useful for trial, but it can be dangerous for amateur
rider.
When the lever is released suddently, the motorcycle will be very
aggressive and dangerous.
To Next Page
Loading...