EasyManuals Logo

ElectrIQ CD12P User Manual

ElectrIQ CD12P
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
HUMIDITY LEVEL & TIMER 2 DIGIT DISPLAY
The led indicator performs the following functions:
1. When the unit is plugged in, it will indicate the humidity level of the room.
2. When the UP and DOWN buttons are pressed, it will indicate the desired humidity
currently set.
3. When the timer is programmed will show the duration.
Notes: When humidity level is outside the normal operational parameters will show LO/HI. If
ambient humidity is lower than 20%, it will show “LO” If ambient humidity is higher than 90%, it
will show “HI
TIMER
TIMER
Press the TIMER button to program the timer. When the timer is activated
the "TIMER" light will be illuminated. Before programming the timer, ensure
the timer function has not been activated (the light must be off). The
following timer programs are available.
DELAYED POWER-ON FUNCTION: With the appliance in stand-by, press
the TIMER button, then use the UP and DOWN buttons to set in how many
hours time you require the unit to start (1~24 hours).
DELAYED POWER-OFF FUNCTION: While the appliance is running with
the desired settings, press the TIMER button, then use the UP and DOWN
buttons to set in how many hours time you require the unit to stop (1~24
hours).
DEFROST
INTELLIGENT DEFROST
The appliance will defrost automatically when the coil sensor detects that
the internal temperature is too low. During defrosting the indicator will light
up. Once the defrost cycle has finished, the appliance will return to the
mode that was previously operating.
TANK FULL
TANK-FULL
When the water tank is full, the TANK FULL indicator light will flash, and
the unit will stop operating. One emptied and replaced, the appliance will
resume operation.
OPTIONAL CARBON FILTER (Air purication function)
Remove the carbon lter from the bag and insert it on the lter housing. It is
suggested to hoover the carbon lter every 2-3 weeks and change it every
3-6 months as this will help to ensure the room is kept fresh and odour free.
OPTIONAL HEPA FILTER (Air purication function)
Remove the HEPA lter from the bag and insert it behind the lter housing.
It is suggested to hoover the lter every 2-3 weeks and change it every 6-12
months.
0807

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ElectrIQ CD12P and is the answer not in the manual?

ElectrIQ CD12P Specifications

General IconGeneral
BrandElectrIQ
ModelCD12P
CategoryDehumidifier
LanguageEnglish

Related product manuals