Do you have a question about the Electro Scan EST12 and is the answer not in the manual?
Describes how to operate the system using a single button.
Details manual operation using separate controls for toilet and system.
Explains the electro scan's maceration, mixing, and bactericide generation process.
Lists and briefly describes the four main components of the electro scan system.
Guides users on how to set the time and date on the LCD display.
Instructions for setting the toilet flush duration via the LCD display.
Explains how to use the system for flushing the toilet without treatment.
Explains the meaning of panel LEDs and LCD display messages.
Details common error codes and their causes and solutions.
Advises on what cleaners to use and avoid for system maintenance.
Lists essential visual checks for hoses, connections, and seacocks.
Recommends frequency and method for cleaning electrodes.
Provides step-by-step instructions for optional muriatic acid cleaning.
Outlines procedures for short-term and long-term system storage.
Details steps for preparing the system for winter to prevent damage.
Guides on restarting the system after storage or winterization.
Lists USCGC certification, capacity, temperature, and flush volume limits.
Provides recommended wire sizes and fuse/breaker ratings for different voltages.
Details available salt feed systems for fresh or brackish water use.
Lists parts included with the unit and parts that must be purchased separately.
Instructions for mounting the main treatment tank and control unit.
Guidance on locating and mounting the system status panel.
Instructions for mounting the LCD display for visibility.
Details plumbing requirements for toilet connection and discharge.
Covers general wiring safety, wire types, and circuit protection.
Specific wiring instructions for the main treatment unit.
Instructions for connecting the system status panel and LCD display.
Explains how to set up single-button operation via system status panel.
Describes wiring for activating the system using the toilet's pushbutton.
Instructions for wiring the optional salt feed pump.
Specific wiring instructions for Raritan Atlantes toilet models.
Addresses common issues encountered during initial system setup.
Provides instructions for safely removing and handling the microprocessor board.
Solutions for problems arising after the system has been in use.
Guidance on identifying and resolving issues causing unpleasant odors.
Lists all replaceable parts for the treatment unit.
Lists all replaceable parts for the control unit.
Details items included in the parts bag and repair kit.
Describes the option to connect the electro scan to a VacuFlush toilet.
| Brand | Electro Scan |
|---|---|
| Model | EST12 |
| Category | Industrial Equipment |
| Language | English |
Loading...