Electro-Voice P1200 - Technical Specifications; Output Power Ratings; Performance Characteristics; Distortion and Noise Metrics

SPECIFICATIONS
16
TECHNICAL SPECIFICATIONS at rated output power 8ohms, one channel driven, unless otherwise specied
Output Power (20Hz - 20kHz / THD ≤ 0,1%) P 1200
into 8 Ohms 2 x 350 W
into 4 Ohms 2 x 500 W
into 8 Ohms bridged 1 x 1000 W
Output Power (1kHz / THD = 1,0%)
into 8 Ohms 2 x 370 W
into 4 Ohms 2 x 550 W
into 8 Ohms bridged 1 x 1100 W
Technical Specication
Frequency Response 10Hz......30kHz/-1dB
Max. Output Level 66V / RMS
before clipping, no load
reference 1 KHz / THD = 1%
Voltage Gain 26 dB (constant gain option)
reference 1kHz
Input Sensitivity 0 dBu/0.775 V
at rated output power 6 dBu/1.55 V
reference 1 kHz
Maximum Input Level 21 dBu / 9 V
Input Impedance 20 kOhm
active balanced
THD < 0.05%
at rated output power MBW = 80 kHz, f = 1kHz
IMD - SMPTE < 0.01%
60 Hz, 7 kHz, typical
IMD - SMPTE < 0.01%
60 Hz, 7 kHz, at rated output power
Signal / Noise Ratio > 105 dB
A-weighted, RMS to rated output level,Input sensitivity + 6dBu
Crosstalk < -70 dB
at rated output power reference 1 kHz
Damping Factor > 300
internal, 1kHz
DIM 30 < 0.01%
DIM 100 < 0.01%
Slew Rate internal > 30 V / µs
Power Consumption 660 VA
1/8 rated output power 4 Ohm
Dimensions (WxHxD) 483 x 88.1 x 426 mm
19 x 3.47 x 16.77 (in)
Weight 17 kg (37.4 Ibs)
Optional Input Transformer 90176