Electrohome EAAC601 - Radio Preset Management

To Next Page

To Previous Page

Temperature Settings

The temperature can be displayed in °C or °F.

1. With the radio off, press and hold the

button to switch between °C

or °F modes.

Listening to the Radio

1. Press the

button on the top panel to turn the radio 'ON'.

2. Press and hold the

button while the radio is ON to toggle between

AM and FM radio.

3. Press the

or buttons once, to move back/move forward one station

at a time.

4. Press and hold the

or buttons for one second to scan back/

forward through the stations; the unit will automatically scan to the next

broadcasting station.

5. Control the radio volume with the

or buttons.

6. Press the

button to turn the radio 'OFF'.

Please ensure that the FM antenna is completely unrolled and extended for

best FM reception. The AM band uses an internal directional aerial. For best

reception, please rotate the radio.

To Set the Radio Presets

1. Press the

button on the front panel to turn the radio ‘ON’.

2. Press and hold the

button while the radio is ON to toggle between

AM and FM radio.

3. Use the

or buttons to select the desired radio station.

4. To set a radio present, press and hold the

button. A preset number

will blink on the display e.g., ‘P02’.

5. Use the

or buttons to toggle to the desired preset number.

6. Press the

button again to set the preset.

7. Repeat steps 2 through 6 to set more presets.

Other manuals for Electrohome EAAC601