electroil IMTPD2.2 M - Working Conditions; Safety Warnings and Risks

4 IMTP(D) 2.2 – ITTP(D) 2.2/4.0/5.5/7.5 - ELECTROIL ENG
TRANSM Transmission line to external
3. WORKING CONDITIONS
Quantity
Simb
ol
Meas.
Unit
IMTP
(
D
)
2.2
ITTP
(
D
)
2.2
ITTP
(
D
)
4.0
ITTP
(
D
)
5.5
ITTP
(
D
)
7.5
Ambient working temperature
T
amb
°C 0..40
Maximum relative humidity
%
(40°C)
50
Protection grade of the Inverter
IP55
Nominal pump power connected to the
Inverter
P
2n
kW
Hp
2.2
3
2.2
3
4.0
5.5
5.5
7.5
7.5
10
Nominal voltage supply of the Inverter
V
1n
V 1x
100..244
3x
200..460
3x
200..460
3x
200..460
3x
200..460
Frequency supply Inverter
f
1
Hz 50-60
Maximum Voltage Inverter output
V
2
V = V
1n
Inverter Output Frequency
f
2
Hz 0..140
Nominal input current
I
1n
A 11 6 12 16 20.5
Nominal output current (to the motor)
I
2n
A
9.5
5.5
11
14.5
19
Maximum output Inverter current
(duty=100%)
I
2
A I
2n
+ 5%
Storage temperature
T
stock
°C -20..+60
Table 1: Working conditions
• Vibrations and hits: they must be avoided by a correct assembling;
• For different environment
conditions, please contact our Sales Department.
This Inverter can not be installed in explosive environments.
4. WARNINGS AND RISKS
The following instructions give you important information for correct assembling and use of the
product. Consequently, before installing the device, these instructions should be read by people
who assemble or use it; besides, these instructions should be available to all person assigned to
device setting and maintenance.
Skilled workers
The installation, the starting and the maintenance of the product must be done by skilled workers, in order to avoid
the risks of an incorrect use.
Dangers due to missed respect of the safety regulations
Failing to respect the safety regulations, could endangers others and damage the devices, which can lead to loss
of warranty. The results of the non-observance of the security rules can be:
• Malfunctioning of the system
• Danger to others, by electrical and mechanical events
Security for the users
All the accident-prevention rules must be respected.
Security rules for assembling and control
Assembling, controlling and servicing the device must read this manual. All operations on this device must be done
when the system is no longer in motion and without voltage supply.
Alterations and spare parts
Every machine, equipment or system alteration must be authorized by the manufacturer. For you and your system
security, it is therefore important to use only original spare parts. The use of non-original components may endanger
others and can lead to loss of warranty.
Wrong working conditions