Electrolux Professional Compass Pro ELD-618 - Water Connection

26
Installation manual
5 Water connection
All water intake connections to the machine should be fitted with manual shut-off valves and filters, to facilitate instal-
lation and servicing.
Water pipes and hoses should be flushed clean before installation.
The machine shall be connected with new water hoses. Re-used water hoses must not be used.
Hoses are to be of an approved type and grade and comply with national regulations.
After installation hoses must hang in gentle arcs.
All connectors present on the machine must be connected to the water supply or the machine may not func-
tion properly. The table shows the possible connection options, which will depend on the water types to be con-
nected to the machine. Information is also available on the panel above the connections.
Water type Water connection
1
2
ELD-618, ELD-620, ELD-625, ELD-630
• Cold and hot
ELD-618, ELD-620, ELD-625, ELD-630
1. Cold
2. Hot
1
2
3
ELD-645, ELD-665, ELD-685
• Cold and hot
ELD-645, ELD-665, ELD-685
1. Cold
2. Hot
3. Cold (for detergent container) / Hot