Installation manual
33
7 Drain connection
Connect a 75 mm / 3 inch pipe or rubber hose to the machine’s drain pipe, ensuring a downward flow from the ma-
chine. Avoid sharp bends which may prevent proper draining.
fig.5330
Drain pump (for models ELD-618, ELD-620, ELD-625)
The drainage pipe should be located over a floor drain, drainage channel or the like.
The highest part of the drain hose shall be positioned according to the figure.
Make sure there is no kinks in the hose.
max
100 mm /
3 15/16 inch
650 mm ± 50 mm /
25 9/16 inch ±
1 15/16 inch
fig.X02458
To Next Page
Loading...
