2010 dmm 7/96 599 73 68-54
2 WARNINGS
Any work on electrical appliances must only be carried out by qualified
technicians.
This platform is not fitted with an ON/OFF switch. Before you access internal
components, take the plug out of the socket to cut the power supply.
If the heating element needs replacing, replace it with one
featuring the same characteristics (2 thermal fuses) so as
not to compromise the safety of the appliance. It is strictly
forbidden to remove/exchange the NTC probes from one
heating element to another.
Always empty the appliance of all the water before laying it on its side
(see description on page 47.
Never place the appliance on its right side (electronic control system side): some
of the water in the detergent dispenser could leak onto the electrical/electronic
components and cause these to burn.
When replacing components, please refer to the code shown in the list of spare
parts relating to the appliance.
To Next Page
Loading...
